This website is such a treasure. When I was first getting into bicycles in 2013, it was a mix of Sheldon Brown and the local volunteer-run co-op that taught me everything I need to know. He is himself a generous spirit, advocating for DIY tooling, repair, and reuse.
I would highly recommend anyone into bicycles to try building their own wheel using his article.
This is my favorite kind of website. An individual going into depth on a topic they're passionate (in the true sense of the word) about. Another example is Dan's Motorcycle Repair Web page [1]. A collection of such websites would be awesome.
The blessing and the curse of the Internet. A few years ago, I was getting new bicycle tires and fellow overly analytic bicycle nerds had built a machine to measure the rolling resistance and puncture resistance of each tire[0], so I of course I "had" to spend hours pouring over all the different options.
This was probably a more sensible use of my time than when I spent hours trying to determine which pedals I should get. Is there a reason to get low profile? Oh, this one is 20 grams lighter--oh, but some people report it breaking more than this other one.
To quote on of the best article titles of all time, reality has a surprising amount of detail.
That site is gold. I've had one that was a complete mystery, it all looked and felt perfect but still, it didn't work. I was tempted to toss it and replace it but the fact that it was a vintage Campagnolo made replacing it extremely expensive and I couldn't even find a proper replacement. So in the end I figured out what the problem was and ended up repairing it.
robrob is basically a real-life Buckaroo Banzai... amp technician, car/motorcycle enthusiast, world helicopter champion, sharpshooter, sysadmin, ham, and owner of at least one Kei truck. We can all only hope to be as cool as him when we grow up.
I started checking out Dan's Motorcycle Repair Web page, expecting to read about Motorcycle Repair, and the first thing I do read about is the Bible. Good lord!
Yeah. There's probably tens of thousands of internet users worldwide with that same story. Myself included: when I was fixing my Bianchi retro road bike's derailleur etc some 20 years ago as a univesity freshman, this site was a definite gold mine, immensely helpful, and taught me a ton. One of my favorite procrastination rabbit holes as well back then. :) And -- a prime example of 1990s era internet and information freedom and layman-level enthusiasm -- selfless sharing of knowledge (and, I wonder if he also used Notepad to write the HTML :). Thanks, Mr Brown, for everything, all the way from Estonia!
My quick story: I built up an old 90s cyclocross bike and his website was the main reason I have this beast of a frankenbike gravel bike. I found his article "8 of 9 on 7" and it changed my life: Take a 9 gear cog, remove one, and it fits perfectly on a 7-speed cassette body.
Then I found his other article on an alternate wiring for a shimano mountain bike RD-310 7/8 speed drive train (which unlocks 9-speed ability), which thus let me use the rugged 7/8-speed derailleur for the cassette WITH shimano dura-ace indexed bar-end shifters (which use, get this, 9-speed spacing on an 8-speed index because it made their system "proprietary"). All of this works together flawlessly <3 <3 RIP sheldon brown.
> I would highly recommend anyone into bicycles to try building their own wheel using his article.
Hear, hear. It's an incredible resource.
I got into building and fixing bikes around 2004, and built a couple of fixed-gear bikes on a shoestring budget using parts from Nashbar.com, and Sheldon Brown's wheelbuilding guide.
Still alive and well in Civil Engineering departments across North America. Their equivalent to Formula Student racing teams in Mechanical Engineering.
I participated in that competition a decade ago. The best teams had a hull that was less than half an inch thick and it didn't leak. We put glass fibers and iirc latex in the concrete mix.
What's nice is that it's immediately legible if you already know how to read, but you also realize how inherently slower it is. One of the nicest parts of Korean (and other east asian languages) is that each block is always a single syllable.
One problem is that Korean syllable structure is not as easy as one os lead to believe, from what I heard. And whether syllable is a meaningful unit is debatable.
I'd make a case for any node-based scripting language in 3D modeling software. Blender or Grasshopper for Rhino comes to mind. Benefit of Grasshopper is that there are convenient Python or C# nodes for you to write scripts that can't be expressed through nodes (IE loops); downside is that it is paid software (although not subscription based!!).
For architecture/design students, Grasshopper is usual their first introduction to programming and algorithmic thinking, and many students become fantastic programmers by extension.
I would highly recommend anyone into bicycles to try building their own wheel using his article.